產品中心
新聞資訊
聯系我們
當前位置:首頁 > 美國EXCALIBUR總線產品 > 多協議板卡 > 正文
時間: 2019/8/7 來源: 作者: sxstart
EXC-UNET2/XX是一種用于配備USB或以太網的計算機的多協議測試和模擬適配器。它體積小,能夠通過USB或以太網接口進行接口,使其成為實驗室和現場開發、測試和執行許多通信協議的系統模擬的完整解決方案。
多臺設備可以通過同一臺計算機上的USB端口操作。此外,多個單元可以在同一網絡上運行,通過為每個單元編程一個唯一的IP地址,并且可以從網絡上的任何計算機訪問。
它支持多達四個獨立的航空電子通信模塊,允許在一張卡上混合和匹配多個不同的協議。
可用模塊包括mil-std-1553、mil-std-1760、MMSI、ARINC-429、ARINC-708、串行、離散和CAN總線。
EXC-UNET2支持廣泛的錯誤注入和檢測功能、IRIG B時間代碼輸入,并且可以訂購-40℃到+85℃的擴展工作溫度范圍和保形涂層。EXC-UNET2提供了C驅動程序,包括源代碼。為I/O連接提供配套連接器。
Ordering Information(命名規則):
Part Number | Description |
EXC-Unet2/xx | Multi-protocol interface for USB or Ethernet equipped computers(適用于配備USB或以太網的計算機的多協議接口) |
Note:
"xx” specifies the modules ordered with the carrier board (up to 4 modules) see below for module codes.(指定與承載板(最多4個模塊)一起訂購的模塊。有關模塊代碼,請參閱下文。)
"-E" added to the end of the part number specifies extended temperature (-40° to +85°C) option.(添加到零件號末尾指定擴展溫度(-40°到+85°C)選項。)
ARINC-429 Modules
A0 - 5 Channels ARINC 429 module, Software selectable for Receive or Transmit
A1-R5 = Ch 0-4 Rx; no Tx | A4-R2T3 = Ch 0-1 Rx; Ch 2-4 Tx |
A2-R4T1 = Ch 0-3 Rx; Ch 4 Tx | A5-R1T4 = Ch 0 Rx; Ch 1-4 Tx |
A3-R3T2 = Ch 0-2 Rx; Ch 3-4 Tx | A6-T5 = Ch 0-4 Tx; no Rx |
ARINC-708 Modules
C0 - 2 Channels ARINC 708/453 module, SW selectable as Tx or Rx
C1- T1R1 = Ch0 Tx, Ch1 Rx |
C2- R2 =Ch0 Rx, Ch1 Rx |
C3- R1T1 = Ch0 Rx, Ch1 Tx |
MIL-STD-1553 multi-function Modules
F0 - 1 Ch MIL-1553 multi-function module, Selectable for Transformer or Direct coupled mode(1信道mil-1553多功能模塊,可選擇變壓器或直接耦合模式)
F1- Transformer coupled mode(變壓器耦合模式) |
F2- Direct coupled mode(直接耦合模式) |
MIL-STD-1760 single function Modules
H0 - 1 Ch MIL-1760 Single function module, Selectable for Transformer or Direct coupled mode
H1- 1760 Transformer coupled mode |
H2- 1760 Direct coupled mode |
Discrete Modules
I0- 10 Ch Discrete, SW selectable for In/Out and TTL/Avionics 0-32 Volt thresholds
I1- 10ch Input | I3- 6ch Output 4ch Input |
I2- 4ch Output 6ch Input | I4- 10ch Output |
Serial Modules
J1- Ch0 RS232, Ch1 RS232 | J4- Ch0 RS485, Ch1 RS485 |
J2- Ch0 RS232, CH1 RS485 | J5- Ch0 RS485, CH1 RS422 |
J3- Ch0 RS232, CH1 RS422 | J6- Ch0 RS422, CH1 RS422 |
MIL-STD-1760 multi-function Modules
L0- 1 Ch MIL-1760 multi-function module, Selectable for Transformer or Direct coupled mode
L1- 1760 Transformer coupled mode |
L2- 1760 Direct coupled mode |
MIL-STD-1760 monitor only Modules
M0- 1 Ch MIL-1760 (transmit disabled) module, Selectable for Transformer or Direct coupled mode
M1- PxM-1760 Transf. coupled mode |
M2- PxM-1760 Direct coupled mode |
ARINC-717 1Rx & 1Tx channels Modules
N1- HBP |
N2- BPRZ |
MMSI Modules
R5- 5 ports EBR-1553 hub +1 cBM port (10 Mbps 1553 protocol, RS-485 front-end)
R2- 2 EBR-1553 hub ports and 1 cBM port |
R4- 4 EBR-1553 hub ports and 1 cBM port |
R6- 6 EBR-1553 hub ports and no cBM port |
ARINC-825 (Canbus) Modules
S2- 825CAN 2ch | S4- 825CAN 4ch |
S3- 825CAN 3ch | S5- 825CAN 5ch |
MIL-STD-1553 single function Modules
T0 - 1 Ch Mil-1553 Single Function Module, Selectable Transformer or Direct mode
T1- Transformer coupled mode |
T2- Direct coupled mode |
MIL-STD-1553 monitor only Modules
V0- 1 Ch MIL-1553 (transmit disabled) module, Selectable for Transformer or Direct coupled mode
V1- Transformer coupled mode |
V2- Direct coupled mode |
產品特性
2 支持的協議(最多4個可移動模塊上):
2 ARINC 429/575(每個模塊5通道)
2 ARINC 708/453(每個模塊2個通道)
2 MIL-STD-1553(單功能或多功能)
2 MIL-STD-1760(單功能或多功能)
2 離散I/O(每個模塊10通道)
2 串行RS-232/485/422/(每個模塊2個通道)
2 ARINC 825(每個模塊5個通道)
2 ARINC 717(每個模塊2個通道)
2 MMSI/AS5652(每個模塊5個通道)
2 16位倒計時
2 1–65635μs分辨率
2 倒數時中斷或全局重置
2 ?實時操作:
2 外部時間標簽時鐘,重置,啟動
2 電源:計算機USB端口和USB電源
RIG B時間碼輸入
?載波:
1KHz調幅正弦波速率名稱:每秒100個峰值
?調制比:3:1輸入振幅:0.8–3.5 vpp(3 vpp典型)
?支持的編碼表達式:BCD時間代碼字;控制功能;直接二進制秒(SBS)一天中的時間
?應用:
同步時間標簽、顯示和IRIG B時間
物理特性
?尺寸:135.0 mm x 86 mm x 25 mm
操作環境
工作溫度:-40°至75°C標準溫度
?濕度:5%–90%不凝結
主機接口
用戶可選擇USB 3.0(C型)或100/1000以太網
功率
?最大值為3.4安培時為5伏,20個滿載ARINC 429頻道
軟件支持
Excalibur Carrier Board系列軟件工具:
?直觀靈活的API源代碼
?兼容32/64位Windows 7/8/10&Linux內核3.x/4.x包括NI LabVIEW和CVI的應用程序
接口
?高附加值:Excalibur分析實驗室工具Windows(可選)
?Merlinplus mil-std-1553總線分析儀,適用于Windows
*用于Windows的神秘ARINC 429總線分析儀
?用于Windows的串行通道GUI應用程序
?窗戶用離散發電機
訂購信息
?EXC-UNET2/XX-M或-C
用于USB和以太網系統。用模塊替換“xx”代碼。請參見EXC-UNET2用戶手冊。
注:“-m”指定配置為160針HD安裝在前面板上的I/O連接器“-c”指定具有硬接線的配置電纜